session {3/8 7:36:32pm > Boyd opened job C:/ProgramData/Stratasys/FDMControlCenter/8.1/jobs/Boyd3/Default.sjb.  Insight 8.1 (4273).}
msg {7:36:33pm > Read 32 facets in 0:00 from "C:/Users/Boyd/Documents/GrabCAD/Neutrino 2016/Drivetrain/OfficialDrivetrain/END CAP.STL"}
msg {7:36:34pm > STL comment: solid END CAP}
msg {7:36:34pm > 28 free surface edges left in model (object is not closed).}
msg {7:36:34pm > Bounding box of this STL X, Y, Z:}
msg {7:36:34pm >       min = (0.0000, -0.0000, 0.0000)}
msg {7:36:34pm >       max = (25.4000, 50.8000, 38.1000)}
msg {7:36:34pm > Done loading STL file after 2 sec.}
msg {7:37:03pm > 	Slice height:	0.0130}
msg {7:37:03pm > Done slicing.}
msg {7:37:03pm > Supports removed}
msg {7:37:03pm > 	Support style:	SMART}
msg {7:37:04pm > Inspecting part curves}
msg {7:37:04pm > Generating supports}
msg {7:37:04pm > Done generating supports.}
msg {7:37:05pm > Done writing boundary curves.}
msg {7:37:05pm > Saved job:  C:/Users/Boyd/Documents/GrabCAD/Neutrino 2016/Drivetrain/OfficialDrivetrain/ssys_END CAP/END CAP.sjb}
msg {7:37:05pm > 	Part fill style:	One contour /  rasters}
msg {7:37:05pm > 	Part interior style:	Sparse - high density}
msg {7:37:05pm > 	Contour width:	0.0260}
msg {7:37:05pm > 	Part raster width:	0.0260}
msg {7:37:06pm > Done generating toolpaths.}
msg {7:37:07pm > CMB moved to envelope center.}
msg {7:37:07pm > Toolpath Information}
msg {7:37:07pm > 	Est. build time:	27 min }
msg {7:37:07pm > 	Model material:	0.776 in}
msg {7:37:07pm > 	Support material:	0.101 in}
msg {7:37:07pm > Done writing CMB file after 1 sec.}
msg {7:37:07pm > Job Summary}
msg {7:37:07pm > 	Full job path:	C:/Users/Boyd/Documents/GrabCAD/Neutrino 2016/Drivetrain/OfficialDrivetrain/ssys_END CAP/END CAP.sjb}
msg {7:37:07pm > 	Toolpath file name:	END CAP.cmb.gz}
msg {7:37:07pm > 	Modeler:		Fortus 250mc}
msg {7:37:07pm > 	Est. build time:	27 min }
msg {7:37:07pm > 	Model material:	0.776 in,	T14,	ABS P430}
msg {7:37:07pm > 	Support material:	0.101 in,	T16,	ABS SR30}
msg {7:37:07pm > 	Slice height:	0.0130}
msg {7:37:07pm > 	Part fill style:	One contour /  rasters}
msg {7:37:07pm > 	Part interior style:	Sparse - high density}
msg {7:37:07pm > 	Visible surface style:	Enhanced}
msg {7:37:07pm > 	Support style:	SMART}
msg {7:37:07pm > 	Contour width:	0.0200}
msg {7:37:07pm > 	Number of contours:	0.2500}
msg {7:37:07pm > 	Part interior contours:	0.0260}
msg {7:37:07pm > 	Part raster width:	0.0260}
msg {7:37:07pm > 	Application:	Insight 8.1, Build version: 4273}
msg {7:37:07pm > Saved job:  C:/Users/Boyd/Documents/GrabCAD/Neutrino 2016/Drivetrain/OfficialDrivetrain/ssys_END CAP/END CAP.sjb,  approximate build time 27 min }
session {3/8 7:39:59pm > Boyd closed job.}
